If you have changed the car battery, unplugged the car stereo or factory reset it, you will require to re enter the security code on the radio. Now this radio code has been put on by Renault to protect it from different owners that have might have purchased it stolen. Now if you have the original exact radio code that the manufacturer has provided you in the handbook, all you need to do is re enter it. Once it has been inputted in correctly, the car stereo will release the security radio lock protection and you can start using it again. If you are the original owner of the radio installed into your Renault car and you can't remember the code you can possibly try some free download calculators that will generate a radio lock code for you.
These instructions to help you enter the radio code on your Renault stereo work on:
Megane
Scenic
Modus
Laguna
Clio
This is the easiest way if you car has a steering wheel controls:
This is the easiest way if you car has a steering wheel controls:
1) Power on the Renault car radio. If the unit is locked with a code it will display '0000'.
2) Find the thumbwheel on the steering wheel controller and use it to increase the digits.
3) Press down the lower button on the bottom of the controller to store the first digit. Then move onto the other remaining three digits left of the Renault radio code.
4) Once you have entered the completed radio code that is 4 digits long, press the lower button again.
5) If you have entered the car radio code for your Renault correctly you will hear an instant beep and you will be provided with the setup menu.
If your car has no controls on the steering wheel then you can use the buttons on the car stereo.
1) Start of by pressing the first preset button to enter the first digit. The numbers will go up each time you press it. Once you have done that you will need to move onto the other three numbers, this can be done by pressing the second, third and fourth preset buttons.
2) Once you have changed the default 0000 code to the correct radio code you will need to store it. This can be done by pressing and holding down the preset button for 10 seconds.
2) Find the thumbwheel on the steering wheel controller and use it to increase the digits.
3) Press down the lower button on the bottom of the controller to store the first digit. Then move onto the other remaining three digits left of the Renault radio code.
4) Once you have entered the completed radio code that is 4 digits long, press the lower button again.
5) If you have entered the car radio code for your Renault correctly you will hear an instant beep and you will be provided with the setup menu.
If your car has no controls on the steering wheel then you can use the buttons on the car stereo.
1) Start of by pressing the first preset button to enter the first digit. The numbers will go up each time you press it. Once you have done that you will need to move onto the other three numbers, this can be done by pressing the second, third and fourth preset buttons.
2) Once you have changed the default 0000 code to the correct radio code you will need to store it. This can be done by pressing and holding down the preset button for 10 seconds.
0 Comments: