If you want your car audio system to play more clear and sound louder, then you have come to the right place. This car audio blog will help you learn more about the car audio journey. Factory car speakers are limited in terms of power handling and how much effort goes into research and design. This is because unless its an factory upgrade sound package that focuses on sound improvement such as bose or harman kardon, the standard car speakers will be made from poor materials. Paper is generally used for the cone and the rubber surround easily degrades overtime.
If you want loud and more clarity, install an 6.5 inch car speaker component setup in the front doors and discard the back rear car speakers. This will provide better sound stage. Adding an separate two channel stereo car amplifier is also recommended. Match the rms of each speaker to an appropriate rms channel on an car amp brand of your choice. Use quality RCA cables to prevent buzzing noises being picked up by the speaker wire. Upgrading car speakers and adding an car amplifier is the best and two most important factors.
You can also upgrade the headunit, something more aftermarket will provide you with more sound adjustments. Some high end pioneer headunits have an built in equaliser which allows you full control of what frequencies your car speakers play. You can also get foam rings that go around the car speaker. What this does is trap the sound between the car speaker and door card so all the sound goes out of the grill. You can get these cheap from ebay. Also you can apply sound deadening material onto metal parts of the door frame, this allows less rattling to occur and chances of better bass response from the car speakers in the door
0 Comments: