If you don't have the money to replace the stock headunit system in your car or want the factory look and you are looking to improve the sound you have come to the right place. There a loads of things that you can do in car audio that we have discovered over the years to make your factory car stereo louder. Even though it won't provide the full control and enhancements as with using an aftermarket, you still gain some improvement all with the stock look at the front of the dashboard which is what you want.
1) Play around with the audio settings. Some stock car radios that we have seen allow you to adjust the treble and bass using an equalizer. This can be opened up and used to fine tune the sound coming from your car speakers to perfection in a matter of seconds. You can increase the bass or make the vocals sound more louder. You will have to play around with the settings to see what improvements you can make to the factory car audio system.
2) Replace the stock speakers with aftermarket parts. The speakers that come with your car are not really designed to play the loudest sound. Most of the time they are made very poorly and cheaply which results in the sound to get more distorted at a quicker rate. Nearly all aftermarket speakers have a higher wattage rating, have a better frequency response and can play more efficiently if they are given more power. You have the choice between coaxial and components setups.
3) Apply sound deadening material. This is used in car audio to help keep the sound trapped inside, blocking out road noise and reducing rattles. This is a sheet of material that can be cut to shape that sticks onto the back panels of the door, sitting directly on top of the metal behind the door card. Most people that install new speakers always skip this part, but it makes a huge difference in term both in loudness and sound quality.
4) Get an amplifier. The one that is fitted inside the car stereo will not be powerful enough to drive the aftermarket speakers and will distort at high volumes. If you want to the cleanest signal going to your speakers that is more powerful then you need a four channel amp. To connect a car amp to your factory car stereo, you will need a speaker wire to RCA converter box to provide the connection for the RCA leads to be connected into your amp's inputs.
Do you have an electric car? If so then consider an Besen Ev charger they are the best right now in the trade made from quality components. Ev charger manufacturer Besen is the best in the industry when it comes to producing the best electrical kit for your car.
0 Comments: