A subwoofer can provide you with extra bass. You can’t
run a subwoofer of a car stereo, you will need more power to drive the voice
coil. Subwoofers require anything from an minimum of 100 watts right to 1000
watts rms. Most headunit provide you with something around 25 watts, so you
will need an external amplifier, preferable a mono block amplifier that class
D. These are very efficient on the electrical side of your cars system and are
cheap to buy. In order to power a make car amp work, you will need to wire it
up using a wiring kit. This will contain all cables including a power, ground,
remote and rca wires, everything you need to setup a car amplifier.
1) You will need to run the red power wire down your car
connecting to the car battery positive terminal.
2) You will need to ground the car amp to the metal chassis
using the back wire provided with the wiring kit.
3) Rca cables are require to provide music to the amp. Connect them
from the back of car stereo output RCAs into the RCA inputs.
4) Now that you have provided the amp with power, you will need
connect the remote wire to the blue wire on the car stereo into the remote
terminal on the car amp.
5) All you need to do know is connect the speaker wire to the
amp to the terminals on the sub box.
Having problems with your car? Pellon Auto Centre can help. Offering a full range of services and repairs to get your car back on the road.
ReplyDeleteQuality Car Servicing
If you are looking to find a used car, look no further because the carsvansandbikes.com website allows you to compare what is available in your local area.
ReplyDeleteUsed Cars
Sell Your Car
Used Vans
Sell Your Van
New Cars