A bass booster control module provides two features, to change the bass frequency and how loud you want it to be. So its kinda like a mini equalizer but just to control the subwoofer. Most people would mount this underneath the cars dashboard around the ashtray or near the drivers seat. This is because them locations are the most accessible while on the go. They may look complicated to install just by looking at the device, however they are relatively simple to install. Today you will learn how to install a bassbooster knob control unit for your car audio system install. This should take you around 10-15 minutes.
1) Find a suitable location to mount it. Now screws are more secure but if you want to remove it later on, it will leave marks. So the solution would be to use double sided sticky tape to mount it in place, that way you don't make permanent holes to the plastic.
2) Connect an RCA output cable that comes from the front car stereo into bass booster instead of it going directly to the amplifier.
3) Connect a second RCA cable into the output socket on the back of the bass booster into the car amplifier. Now the music can be controller by the bass booster box so that know you can select the frequency and gain without having to adjust it manually from the amp itself.
0 Comments: